If you find yourself working at height regularly, either on a scaffolding our on roofs, even in manholes, a fall arrest block is an essential piece of equipment designed to help minimise the risk of injury, or worse. If you are working at height without using a fall arrest block, you are putting your own safety, and the safety of others at risk.
Fall arrest blocks comprises of a retractable life line either made from synthetic rope or steel cable. The rope or cable retracts up onto a reel, that is stored within a protected housing, often made out of anti-corrosive metal, but in some cases, like our super lightweight fall arrest blocks or mini blocks, they can be made from plastic.
Each of our fall arrest blocks have a different working length, from 2.2 meters to 2 meters. The working load length is the measurement from the bearing point in the housing, to the bearing point of the hook the rope or cable is fully extended. In the event of a fall, the lifeline is pulled out the housing until it reaches a critical velocity at which point the breaking mechanism activates and the block decelerates to over a short distance, protecting you from falling to the ground.
Here at SafetyLiftinGear we supply a large range of Fall Arrest blocks, including mini fall arrest blocks, today we are going to run through some of the features of our best-selling fall arrest blocks.
Mini Fall Arrest Block
This product is from our specialist mini fall arrest block range, used by workers when they are working at height. This block is designed to be connected to a specialist fall arrest harness.
The G-Force Rolex Mini Block has an almost instant break, so in the event of a fall, the risk of injury is greatly reduced. Unlike the previous models, the lifeline in this unit is made from webbing, and is designed in such a way that it reduces the impact force to less than 6kN.
With a working length of 2.25 meters this mini fall arrest block provides a cost effective solution for many forms of work at height.
Click here for more information on our Mini Fall Arrest Blocks.
Fall Arrest Block with Recovery Winch Facility
This G-Force CRW300 Fall arrest block features a retrieval winch, an easy and effective way to lift a worker who has slipped and fallen to safety. However, when the winch is not engaged the G-Force CRW300 operates as a standard fall arrest block, making it one of our most versatile fall arrest blocks.
The features of this product are really where this product sells itself; this CRW300 is houses in lightweight aluminium alloy housing, making it easy to transport, and store. This product also features a zinc galvanised steel wire rope, available in two lengths (20 and 25 meters). This product also comes with optional brackets which enable you to fit this block directly to the leg of a rescue tripod.
At SafetyLiftinGear, we stock a comprehensive range of Fall Arrest Blocks. In the unlikely chance you are unable to find the specific product you are searching for, don't hesitate to contact us, and a member of our team will happily assist you.
0117 9381 600
