Over the past couple of weeks, the team here at SafetyLiftinGear have been working hard behind the scenes to bring to you our improved collection of cable handling products!
We know and understand how difficult it can be to handle cable if you’re not adequately equipped. In such circumstances, having the right equipment can make your lifting and transporting operations a lot safer and more efficient. That is why we strived to extend and improve our cable handling range to include new and improved products.
However, as a result of there being so many types of cable handling products available, it can be difficult to know exactly what you need to help complete your specific lifting application. To help you out and to show you what we have to offer at SLG, here is a selection of cable handling products that could come in handy when you’re at work.
Cable Handling Products
Cable Drums Jacks
Versatile and lightweight, cable drum jacks are an essential piece of equipment needed to keep your cable tidy. Cable drum jacks can be adjusted quickly to accommodate a wide range of cable drums and are commonly fitted with wheels in order for them to be moved around with little to no effort. These are best used as supports for cable drum spindles.
Cable Drum Rotators
Heavy-duty pieces of equipment, cable drum rotators are often welded with steel sealed bearings, with one fixed and one adjustable diablo control allowing you to rotate the drum of your winch and wind in the cable with ease.
Sub Duct Pulling Eyes
Sub duct pulling eyes, also commonly referred to as carrots within the lifting industry, come with a clevis pin and an eye at the opposite end to attach or draw rope through. These are often tapered and threaded to cover a particular length of sub duct and come in two types; PE1 and PE2. PE1 sub duct pulling eyes are suitable for a sub duct range of 24-29mm, whereas PE2 has a larger range of 29-37mm.
Cable Grips
Sometimes referred to as cable stockings and cable socks, cable stockings are an incredibly efficient way to support or pull a variety of cables. Cable grips are manufactured from high tensile galvanised steel wire, providing them with increased levels of strength. Sometimes they’re even manufactured using stainless steel and Kevlar when operations are conducted in extreme condition or when an even stronger pull is needed.
Conduit Rods
Conduit rods are a suitable, efficient method of installing draw ropes and winch ropes into ducts, making them an ideal piece of equipment for cable pulling operations. Conduit rods are often manufactured with glass-fibre reinforced epoxy rods, with an outer polyethene coating which provides fantastic adhesion properties. Conduit rods also benefit from excellent levels of elasticity which makes them perfectly suited for any duct installation. Conduit rods are available on either a free-standing frame or on a mobile frame for larger rods.
Browse Our Cable Handling Products >
For more information on our collection of cable handling products or if you would like to talk to us to enquire about a particular product that you need for your applications, please do not hesitate to contact us today!
0117 9381 600
