Everyday we read stories about how people are injured while they were working at height, or we see a story about people who show complete disregard to health and safety regulations which results in putting themselves and others in an incredible amount of danger.
It is important that when you are required to work at height, you do so responsibly, not just for your own safety, but for others too. By following these 3 safety measures you and other around you will remain safe:
Fall Arrest Blocks
When you are working at height, it is essential that you are protecting yourself and minimising the risks of slips and falls from height. Fall Arrest blocks are a retractable lifeline, generally made from wire rope, which is stored within a case containing an inertia reel.
In the unfortunate event of a fall, the wire rope is pulled out of the block until it reaches critical velocity, which is when the breaking system locks, preventing you from falling any further. Our Fall arrest blocks all have a shock-absorbing system built in preventing you from getting hurt.
Here at SafetyLiftinGear, we sell a variety of Fall Arrest blocks, so when you are purchasing, please ensure you have selected the correct Block for the required task.
Click here to view all of our fall arrest blocks
Safety Harnesses
When you are working at height, a safety harness most be worn at all times. We know that they are not the most fashionable of accessories, but they are lifesaving.
If you are working at height, make sure that you are using a harness attached to one of the fall arrest blocks we mentioned above. This will protect you from injury in the off chance you fall whilst working at height.
Here at SafetyLiftinGear we sell a huge variety of safety harnesses, from the basic fall arrest harnesses, through to the more specialist, multipurpose harnesses, insulated harnesses and flame resistant harnesses.
Click here to view our full range of safety harnesses
Dropping your tools from a height can have some dire consequences. Firstly, You could end up damaging any equipment or machines that are directly below where you are working, which could end up with some costly repairs for your company. Secondly, you could end up damaging your tool, rendering it useless so you will have to pay to get it replaced. Thirdly, and most importantly, you could end up fatally injuring a member of the public or a workmate.
To prevent creating a hazard it is essential that you use a Tool Lanyard. We supply a huge range of top quality tool lanyards.
Keep your spanner close to hand, by using our specialist wrist lanyards, Keep Loosing your hard hat? Why not attach it to your work belt with our elastic hard hat lanyard and buckle? Using a power tool? use the ERGODYNE Power Tool Trap! Whatever your requirements, we are confident that we have a suitable lanyard for you!
Click here to view our full range.
We pride ourselves on the fact that we stock a truly comprehensive range of Fall protection equipment. However in the event that you cannot find the exact item you are looking for, please contact us on 0808 123 69 69 or email sale@safetyliftingear.com to talk to a member of our customer service team.
Here at SafetyLiftinGear, we strive to provide you with our top quality products at our best prices. If you are a regular visitor to our site, you will know that we often provide you with amazing deals and offers, and slash our prices, so whatever your budget you can guarantee you will be able to afford our top quality products.
This week we have dropped the prices on many of our liftingear pallet trucks;
2.5 tonne pallet truck wide fork
With its extra wide forks measuring 685mm wide and 1150mm long, coupled with a working load limit of 2.5 tonnes this pallet truck is designed specifically for people who regularly find themselves moving wide, heavy loads.
Now available for £215.63
Click here to view.
Low Height Pallet Truck
This 2 tonne pallet truck provide easy access to the lowest pallets and containers with a floor access as low as 51mm. it also features tapered Fork tips with an entry guide roller, to ensure access is quick and as efficient as possible. This pallet truck is provided with a 12-month warranty as standard.
Available now from £412.6
Click here to view this pallet truck
Galvanised Pallet Truck
This pallet truck is a firm favourite for food storage companies. This pallet truck features a pressure relief for protection from overloading, and because of its galvanised finish, its can operate perfectly in the harsh environments often found in food freezers, pharmaceutical and chemical industries.
You can now buy this outstanding pallet truck for just £460.78
Click here to view
All Terrain Pallet Moving Truck
Our all-terrain pallet truck can handle the harsh environment of a construction site with ease. Many builders and contractors use our all-terrain pallet trucks to move heavy loads around their site quickly and safely. this pallet truck features heavy duty pneumatic tyres, and comes with a 12-month warranty as standard.
With a Working Load Limit of 1.5 Tonnes its easy to see why this pallet truck is so popular with in the construction industry.
Click here to see more
On top of our enormous savings, we are also offering our pallet trucks for long term hire from just £5 per week!
Remember to like our Facebook page and follow us on Twitter to keep up to date with all our offers.
When it comes to purchasing lifting equipment it is tempting to purchase second hand lifting gear to help cut your company costs. While it is understandable why many companies would chose to invest in second hand lifting equipment because it is a lot cheaper than buying brand new equipment, it is not something that we at SafetyLiftinGear recommend.
Even though there is a great deal of reputable second hand lifting equipment dealers out there, there are also a lot of deals who handle substandard equipment. This could mean that you may end up with some untested, unsuitable and above all else, unsafe lifting equipment. This could end up causing damage to machinery or fatal injuries if the equipment fails.
Here at SafetyLiftinGear we strongly recommend you either buy brand new lifting equipment or hire your lifting gear from a reputable company:
When purchasing or hiring your products from SafetyLiftinGear, you can be confident that you are in expert hands, and receiving the best service. Click here, to view our range of lifting equipment. To Hire our equipment simply click the red “hire me” button and follow the on screen instructions. If you run into any difficulties, or require any assistance, please don’t hesitate to contact our friendly customer service team on 0808 123 69 69.
At SafetyLiftinGear, we supply a wide selection of ratchet straps as part of our range of load restraint products, which are ideal for for the secure transportation of heavy loads. Like other lifting and transportation products, ratchet straps come with their own WLL as well as a minimum breaking strength, making it easy to select the correct strap for your particular application.
If you are work at height, it is important to not only use personal fall protection equipment such as safety harnesses and fall arrest blocks. It is equally as important to ensure that your tools are also protected from being dropped or falling from height.
If you accidently drop your tools whilst working at height you could potentially damage any equipment that is on the ground below, cause an accident, or cause a fatal injury. Tool lanyard attaches onto your person at one end, either around your waist, wrist or onto your safety harness, and secure your tool at the other. By using this simple safety measure you minimise the risk of causing a serious accident.
Here at SafetyLiftinGear we stock a fully comprehensive range of tool lanyards, no matter your requirements, we are certain we have a lanyard that suits your need. Click here to view our full range of Tool Lanyards.
In the unlikely event you cant find the exact lanyard you require, please contact our customer service team on 0808 123 6969 or email sales@safetyliftingear.com
If you have been asked to transport goods, especially heavy goods, you must use the correct load restraints before starting your journey. Using load restraint equipment such as cam buckles and ratchet straps prevents your load from coming loose in transit. Failure to secure your load in the correct manner could result in damaged goods, as well as injuries and possibly fatalities if your unsecured load causes an accident.
If you are transporting your load across continents or simply just moving a loaded pallet by fork lift in a warehouse, regardless of the distance you intend on travelling, ratchet lashings must be used.
It is important to note that, just with any other equipment that is used to transport loads, ratchet straps have their own Working Load Limit (WLL) and their own Minimum Breaking Strength. The break strength is the amounts of weight a ratchet lashing can withstand without breaking. The breaking strength of each component of a ratchet lashing is independently test. But like everything, the ratchet lashing is only as strong as its weakest point, so the part of the ratchet lashing that is the weakest is considered to be the break strength of the entire lashing.
From the Minimum breaking point, the working load limit can be calculated by taking 1/3 off the break strength. So this means that the ratchet lashing with break strength of 300kg has a Working Load Limit of 1000kg.
Remember to check the working load limit of your ratchet lashing before use, to make sure they are able to withstand your load.
How to use ratchet lashings
When you receive your ratchet straps they will require some basic assembly. This can get quite confusing, so we have provided a simple 5 step guide to make sure you have assembled them correctly.
Remember to tie off any excess webbing, and to check that your load is completely restrained and secure before commencing your journey
Here, at SafetyLiftinGear we supply a large variety of Ratchet Lashings, specifically designed to help you transport a variety of loads, and attach to various tie down points. Below are some of our best selling Ratchet Lashings:
Ratchet Lashing with Open Rave Hooks
Rave hooks ratchet lashings are widely used for attaching loads to commercial vehicles or trailers because of their ease of application. This product is available in 3 lengths (6 mtr, 8 mtr and 10 mtr) and has a minimum breaking strength (MBS) of 5 tonnes.This ratchet lashing is trusted by many UK transport companies as it is strong, reliable, shock absorbent and extremely hard wearing.
More Information About this Product >
Closed rave hooks (chassis hooks) are a face and effective way of restraining your load to your commercial vehicle, flatbed lorry or truck. Again, these types of ratchet straps are extremely popular with many UK transport companies because of their ease of application. Simply hook the ratchet lashing to your truck or lorry directly for secure transit.
Here at SafetyLiftinGear, we have a range of ratchet lashings with chassis hooks available, all with different working load limits and different lengths.
Full Range of Ratchet Lashings with Chassis Hooks >
The endless ratchet lashing is a lashing that has no hooks or fixing points. If you are required to secure a load to pallets, racking or you want to secure items together that do not need to be secured down, then an endless ratchet strap is the perfect choice.
These lashings are available in various lengths and Minimal Breaking strengths.
Browse Our Range >
Please ensure that you have selected the appropriate ratchet lashing for the intended job. If you have any questions regarding our range of lashings, then please contact us.